Crealitys Space Pi Filament Dry Box helps keep your filament dry while youre printing. It gently heats the material to avoid problems like stringing, clogs, or bad layer adhesion. With an easy-to-use touchscreen and support for a wide range of filaments, its a handy addition to any 3D printing setup.
Highlights
The Space π Dry Box uses a double 360 degree hot air system that circulates heat evenly inside the chamber. This helps dry filament efficiently and prevents issues that can come from moisture in the material. At the core is a 110-watt PTC heating element, known for being both durable and energy-efficient.
On the front of the unit, there’s a 3.7 inch LCD touchscreen. It shows useful info like the drying timer, current temperature, and humidity level. The interface is simple and makes it easy to keep track of the drying process.
There are 12 temperature presets for different types of filament, but you can also set the temperature manually between 45 and 70 degrees. The timer is adjustable from 0 to 48 hours, depending on your needs. If you’re using high-speed machines or Hyper series filament, the dry box is fully compatible.
If the power goes out, the Space Pi remembers your last settings. That means you don’t need to re-enter everything once power is restored.
It works with both 1.75 mm and 2.85 mm filaments, and you can easily switch between Celsius and Fahrenheit. There’s a power switch for safety and a silicone plug to keep moisture out. The dry box runs on 220V and has a rated power of 145W. It fits spools up to 20 cm in diameter and 7.9 cm in width.
check_circle
check_circle
Kommentit (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent